DIY Envelope Tutorial

Hello, friends! 

As promised, I will share a quick and simple tutorial today for making your own envelopes!

To start, you’ll need one sheet of 12×12 cardstock or patterned paper and glue. I like using CTMH Liquid Glass for a strong bond, but you can use whichever glue you have on hand or like to use.

Decide which side of the patterned paper you would like to face outwards (in this case it’s the floral pattern), then make two folds approximately 1- 1.5inches from each side (fold inwards, towards the centre of the paper). 
A trick I like to use is placing my letter in the bottom centre of the patterned paper, and fold each side around it. I use this trick to also roughly guesstimate the bottom fold (next step).

Apply glue to the bottom portions of each 1-inch fold, then fold paper upwards (pictured below). The bottom fold should be approximately 2 inches from the bottom of the paper. This will become the bottom of your envelope. (Place your letter inside, for reference). 

This is how your envelope should look now. Next, you’ll want to fold the top edge of the patterned paper envelope approximately 0.5- 1 inch inwards, and again nearer the top of your letter (approximately 2-3 inches from the top edge fold).
*Note: I say approximately, because I haven’t measured exactly each of my folds. I’ve created my envelopes strictly by feel and by my naked eye.

Measurements will be different, dependent on what size paper your letter is written on. I currently use standard loose-leaf paper, which I assume measures 8.5×11 inches. My envelopes were created around this standard size, folded in three). 

*Another Note: before gluing any corners, mock up your envelope to avoid making any mistakes. I always make all my folds first, and then go back and glue where appropriate.  

(Top edge folded down, 0.5-1 inch from top edge); glue the thicker, corner portions. Here’s how it should look completed (below):

(I flipped the envelope over, so the front is facing outwards.) The backside of your envelope will have a clean edge where you’ll adhere it closed with glue. This is unlike a standard card envelope that has the V-shaped flap. 

Lastly, decorate to your hearts desire! I’ll sometimes add washi tape to the back fold after I’ve glued it closed for a little more pizzazz. That’s not necessary.  Do whatever feels right!

I hope today’s tutorial made sense and was clearer than a load of mud to you! If not, please let me know, and I’ll do my best to clarify it!

Advertisements

2 thoughts on “DIY Envelope Tutorial

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s